Overtime With Two Pay Rates: Weighted Average Method

When a nonexempt employee works two jobs at different hourly rates in the same workweek, the FLSA default is the weighted average: add up the straight-time pay from both jobs, divide by total hours to get the regular rate, and pay an extra half of that rate for each hour over 40. The alternative is to pay overtime at 1.5 times the rate of the job the employee was doing during the overtime hours, the rate-in-effect method, but only if you and the employee agreed to it before the work was performed.

This guide solves the same week both ways, shows the difference, and covers tipped employees with a second job and workers who split time between two businesses. It is general information, not legal advice. Rules change and vary by state, so confirm your situation with an employment attorney or your state labor department.

Payroll worksheet comparing weighted average and rate-in-effect overtime for an employee with two pay rates

Method 1: the weighted average (the default)

Under 29 CFR 778.115, when an employee works at two or more types of work with different rates in one workweek, the regular rate for that week is the weighted average of those rates: total earnings from all jobs divided by total hours at all jobs. You use it unless you meet the conditions for the rate-in-effect method below. The steps:

  1. Multiply the hours in each job by its rate and add any bonuses or differentials for the week.
  2. Add everything up to get total straight-time pay.
  3. Divide by total hours worked to get the regular rate.
  4. Multiply half the regular rate by the hours over 40 to get the overtime premium.
  5. Add the premium to the straight-time total.

Example: an employee of a property maintenance company works 30 hours as a maintenance technician at $22.00 and 15 hours on the cleaning crew at $16.00, 45 hours in the workweek.

StepCalculationAmount
Technician pay30 x $22.00$660.00
Cleaning crew pay15 x $16.00$240.00
Straight-time total$660.00 + $240.00$900.00
Regular rate$900.00 / 45$20.00
Overtime premium5 x 0.5 x $20.00$50.00
Total pay$900.00 + $50.00$950.00

Only the FLSA-required premium, the "half" in time and a half ($50.00 in this example), is qualified overtime compensation for the federal overtime deduction. Starting with tax year 2026, employers report it on Form W-2, box 12, code TT. Overtime required only by state law or by contract does not qualify. See no tax on overtime and W-2 reporting.

The same logic applies to bonuses, commissions and shift differentials: they go into the week's total pay before you divide by hours. The full method, with a bonus example, is in how to calculate the regular rate and overtime.

Method 2: overtime at the rate in effect

Section 7(g)(2) of the FLSA, explained in 29 CFR 778.419, lets you pay overtime hours at no less than 1.5 times the rate for the type of work the employee is doing during those hours. No other overtime is then due, but only if all of these conditions are met:

  • Advance agreement. You and the employee agreed to the method before the work was performed. Put it in writing, even though the regulation does not require a particular form.
  • Bona fide rates. Each rate is at least the applicable minimum wage and is the rate you actually pay for that work in non-overtime hours.
  • All overtime hours covered. The hours you pay at the overtime rate are at least the hours worked over 40.
  • Minimum wage on average. Average hourly earnings for the week, not counting overtime pay, are at least the minimum wage (29 CFR 778.417).
  • Bonuses still get overtime. If the employee also earns a nondiscretionary bonus or other pay that belongs in the regular rate, you still owe the extra overtime on it.

Same week as above, with an advance agreement. Under this method the result depends on which job the employee was doing during the 5 overtime hours:

MethodCalculationTotal payDifferenceFLSA premium
Weighted average$900.00 + (5 x $10.00)$950.00None$50.00
Rate in effect, overtime on the cleaning crew(30 x $22.00) + (10 x $16.00) + (5 x $24.00)$940.00$10.00 less$40.00
Rate in effect, overtime as technician(25 x $22.00) + (15 x $16.00) + (5 x $33.00)$955.00$5.00 more$55.00

The rate-in-effect method costs less only when the overtime hours fall in the lower-paid job. If you pay that way without a prior agreement, the week is recomputed with the weighted average, and the $10.00 difference becomes back pay for every affected week.

For the tax side, the IRS says that when overtime is computed under one of the alternative methods in section 7, you use the overtime premium actually paid under that method (FS-2026-13, question 17). Here that is 5 x $8.00 = $40.00 for code TT, or 5 x $11.00 = $55.00 if the overtime was technician work. Confirm the treatment with your payroll provider or tax professional.

Which method to use

The weighted average is always allowed and needs no agreement. The rate-in-effect method adds two burdens: the advance agreement, and records that show which job the employee was doing in each overtime hour. If you cannot prove both, use the weighted average.

Either way, your records need the hours in each job for each workday, the rate for each job, and the total hours for the workweek. A single "45 hours" total is not enough to support either calculation.

Tipped employees with a second job

A server who also works prep or dishwashing shifts at a non-tipped rate is in a dual job. Under the restored 1967 text of 29 CFR 531.56(e), you can take the tip credit only for the hours in the tipped occupation. Related side work inside the tipped job, such as setting tables, is a separate question covered in restaurant tipped employees and time clock records.

The overtime math is still a weighted average, but the tipped hours enter at the full minimum wage, because the regular rate includes the tip credit (29 CFR 531.60). Example at the federal minimum: 30 hours as a server ($2.13 cash plus a $5.12 tip credit, $7.25 total) and 15 hours as a prep cook at $12.00.

  • Straight-time total: (30 x $7.25) + (15 x $12.00) = $217.50 + $180.00 = $397.50.
  • Regular rate: $397.50 / 45 = $8.8333.
  • Overtime premium: 5 x 0.5 x $8.8333 = $22.08.
  • Total pay: $397.50 + $22.08 = $419.58, of which the tip credit covers 30 x $5.12 = $153.60, so you pay $265.98 in cash wages.

The code TT amount for that week is the $22.08 premium.

When the second job is for a different employer

If the two jobs are with separate, unrelated businesses, each employer counts only its own hours, and neither owes overtime just because the total passes 40.

It is different when the businesses are joint employers, for example two companies with the same owner that share managers and move the same employees between them. Then the hours for both are added together for the 40-hour test, and both businesses are responsible for the overtime. Splitting one employee's week between two of your own companies usually does not avoid overtime. The DOL proposed a joint employer rule in April 2026; if you share staff between companies, get advice on your setup.

Where two rates come up most

  • Field service. A technician who also drives a delivery route or works the warehouse at a different rate. See field service and mobile crews.
  • Construction and prevailing wage. On Davis-Bacon work, a worker who performs work in more than one classification can be paid each classification's rate only if your payroll records accurately show the time spent in each (29 CFR 5.5). See construction crews and prevailing wage.
  • Healthcare. An aide who also works shifts as a medication technician, or a home care worker paid different rates for different services. Hospitals and residential care facilities also have the 8/80 option, which needs its own prior agreement. See healthcare and home care timekeeping.

How SimpleWorkshift Helps With Two-Rate Overtime

Both methods start from exact hours. With SimpleWorkshift, employees clock in and out from the iOS or Android app or the web, overtime is calculated automatically on the workweek you configure, and managers get alerts as employees approach 40 hours. Every edit to a time record keeps who made it, when and the original value.

Custom reports with hours per employee per pay period export to CSV for your payroll provider, which applies each job's rate. Start a 30-day free trial, with no contracts and cancel anytime, at simpleworkshift.com.

About the SimpleWorkshift Team
We are an HR tech company building tools that save time and money for small and midsize businesses. We started a few years ago with one goal: to make powerful HR technology simple and affordable. Since then, we have kept improving our products together with our customers, because we believe that when managers spend less time on routine admin, they have more time for their people. Today our cloud platform covers time tracking, PTO and absence management and payroll closing, so you can manage your whole team in one place.